Exartech MPG⁺E (1+8)

Exartech MPG⁺E (4+4)

MPG⁺E (1+8) :  1broadband with 8POTS

Same as Exartech MPG⁺ series, MPG⁺E are consisted by two parts, LU (Line Unit) and RT (Remote Terminal). LU is located on central office (CO) side which can be installed in MPG+ universal shelf, a 5U height and 19 inches shelf. And, RT is located on remote side (or customer side) by using weather proof outdoor case.

MPG⁺E(1+8) provide an SHDSL (G.SHDSL) interface by using existed twisted pair between RT and LU. It can support POTS (Voice) and Ethernet interface (e.g. Internet access) as your wish. With Exartech Scarab-E (Ethernet modem), MPG⁺E can extend Ethernet transmission distance to 2~5 Km by SHDSL

 

Key Features:

Key features of MPG⁺E LU:

Ø           On board DC to DC converters

Ø           One SHDSL port with remote power feeding

Ø           One Ethernet port (Implemented on a daughter board)

Ø           Eight port LPOTS/LCPOTS.

Ø           Process and response MPU command

Ø            LEDs display status

Ø           Support Power On Self Test (POST)

 

Key features of MPG⁺E RT:

Ø           Power source from LU remote power feeding

Ø           One SHDSL port

Ø           Eight port RPOTS

Ø           One Ethernet port or SHDSL port for extension (Implemented on a daughter board)

Ø           Process and response MPU command via SHDSL interface pass through LU

Ø            LEDs display SHDSL link status

Ø           Support Power On Self Test (POST)

 

Key features of  Ethernet daughter board:

Ø           Can be installed on LU or RT

Ø           One Ethernet port

Ø           The data rate can be configured by main board

Ø           Ethernet link rate will be 1.024Mbps, 512Kbps, 256Kbps and/or 192Kbps

 

Key features of  DSL daughter board:

Ø           Install on RT

Ø           One extension SHDSL port for Exartech Scarab-E

Ø           The data rate can be configured by main board

Ø           Link rate will be 1.024Mbps, 512Kbps, 256Kbps and/or 192Kbps

 

Specification:

Power Input:

Ø     DC input: -36Vdc ~ -72Vdc which is provided from backplane

Ø     Power consumption: less than 20 Watts per cards

Ø     Connector: Via DIN64 connector from backplane

Remote power feeding:

Ø        230Vdc ~ 300Vdc (230Vdc typical) input.

Ø     Feeding current: < 60mA

Ø     Feeding power: max 10 watt per port

Ø     On-board remote power feeding source

SHDSL Interface:

Ø     Line code: TC-PAM

Ø     Transmission rate: up to 2.3M

Ø     Range: up to 6.0 km at 0.4mm copper wire(depended on rate)

Ø     AC impedance: 135 ohm

Ø     Meet ITU-T G.991.2, ETSI TS 101 524 and ANSI T1.422 requirements

Ø     Connector: Wire wrap pins (rear access)

LPTOS (POTS on LU)  Interface:

Ø         Ringing detection: 16 ~ 60 Hz, > 40 Vrms

Ø         Metering pulse detection: 12/16KHz, > 10dBm (LCPOTS only)

Ø         Battery reversal detection delay: < 40mS (LCPOTS only)

Ø         AC impedance: 600 ohm (900 ohm for customer requirement)

Ø         Encoding: A law (meet ITU-T G.711 requirements)

Ø         VF parameter: meet ITU-T G.712 requirements

Ø        On hook data transmission delay: < 50mS

Ø         Connector: Wire wrap pins (rear access)

RPTOS (POTS on RT)  Interface:

Ø         Loop resistance: 1.2kohm (including phone-set)

Ø         Ringing generation: >50Vrms, 25 ± 1 Hz 

Ø         Open circuit voltage: 48Vdc

Ø         Metering pulse generation: 12/16KHz, >-2.5dBm

Ø         AC impedance: 600 ohm (900 ohm for customer requirement)

Ø         Encoding: A law (meet ITU-T G.711 requirements)

Ø         VF parameter: meet ITU-T G.712 requirements

Ø         On hook data transmission delay: < 50mS

Ø         Connector: Terminal Block (Pluggable Rising Clamp Type)

Ethernet Interface:

Ø         Meet IEEE 802.3 requirements

Ø         10/100M auto negotiation

Ø          Support half and full duplex

Ø          AC impedance: 100 ohm

Ø           Loop reach: 100m@(Cat5 or above)

Ø           Connector: RJ-45 (front access)

Operation Environmental Conditions: (indoor version, LU)

Ø         Temperature:  0 ~ 60°C

Ø         Humidity:       5 ~ 95 %

Operation Environmental Conditions: (outdoor version, RT)

Ø        Temperature: -20 ~ 70°C

Ø        Humidity: 5 ~ 95% (RH)

MPG⁺E (4+4) :

Integrated 4broadband and 4POTS services together

MPG⁺E(4+4) integrate broadband and voice together and support 4 * POTS (Voice) and 4 * XDSL (Data) as your wish. MPG⁺E(4+4) enable direct connectivity towards data/IP network, and delivery services from POTS to XDSL, Ethernet….It means MPG⁺E(4+4) can convent TDM networks and combine IP network.In addition, MPG⁺E(4+4) support longer transmission distance, and the data rate will be 1.024Mbps, 512Kbps, 256Kbps and/or 192Kbps to meet the demand of customers.

 

Key Features:

Key features of MPG⁺E LU:

Ø           Integrate 4 broadband and 4 voice service

Ø           On board DC to DC converters

Ø           One SHDSL port with remote power feeding

Ø           Four port LPOTS/LCPOTS

Ø           One Ethernet port .for Internet connection

Ø           Process and response MPU command

Ø           LEDs display status

Ø           Support Power On Self Test (POST)

 

Key features of MPG⁺E RT:

Ø           Power source from LU remote power feeding

Ø           One SHDSL port connects to LU

Ø           Four SHDSL ports for extension to CPE

Ø           Process and response MPU command via SHDSL interface pass through LU

Ø           LED display SHDSL link status

Ø           Support Power On Self Test (POST)

 

Key features of  Customet Permisis Equipment (CPE):

Ø           Installed on customer side (local power is required)

Ø           One SHDSL port connects to RT

Ø           One Ethernet port

Ø           One RPOTS port

Ø           The data rate can be configured by LU. (or MPU)

Ø           Ethernet link rate will be 1.024Mbps, 512Kbps or 256Kbps

 

Specification:

Power Input:

Ø     DC input: -36Vdc ~ -72Vdc which is provided from backplane

Ø     Power consumption: less than 20 Watts per cards

Ø     Connector: Via DIN64 connector from backplane

Remote power feeding:

Ø        Output Voltage 200Vdc ~ 300Vdc

Ø     Feeding current: < 60mA

CPE Power input:

Ø     Line code: TC-PAM

Ø     Power Consumption: max 10 watt

SHDL Interface:

Ø     Line code: TC-PAM

Ø     Transmission rate: up to 2.3M

Ø     Range: up to 6.0 km at 0.4mm copper wire(depended on rate)

Ø     AC impedance: 135 ohm

Ø     Meet ITU-T G.991.2, ETSI TS 101 524 and ANSI T1.422 requirements

Ø     Connector: Wire wrap pins (rear access)

LPTOS (POTS on LU)  Interface:

Ø         Ringing detection: 16 ~ 60 Hz, > 40 Vrms

Ø         Metering pulse detection: 12/16KHz, > 10dBm (LCPOTS only)

Ø         Battery reversal detection delay: < 40mS (LCPOTS only)

Ø         AC impedance: 600 ohm (900 ohm for customer requirement)

Ø         Encoding: A law (meet ITU-T G.711 requirements)

Ø         VF parameter: meet ITU-T G.712 requirements

Ø         On hook data transmission delay: < 50mS

Ø         Connector: Wire wrap pins (rear access)

RPTOS (POTS on RT)  Interface:

Ø         Loop resistance: 1.2kohm (including phone-set)

Ø         Ringing generation: >50Vrms, 25 ± 1 Hz 

Ø         Open circuit voltage: 48Vdc

Ø         Metering pulse generation: 12/16KHz, >-2.5dBm

Ø         AC impedance: 600 ohm (900 ohm for customer requirement)

Ø         Encoding: A law (meet ITU-T G.711 requirements)

Ø         VF parameter: meet ITU-T G.712 requirements

Ø         On hook data transmission delay: < 50mS

Ø         Connector: Terminal Block (Pluggable Rising Clamp Type)

Ethernet Interface:

Ø         Meet IEEE 802.3 requirements

Ø         10/100M auto negotiation

Ø          Support half and full duplex

Ø          AC impedance: 100 ohm

Ø           Loop reach: 100m@(Cat5 or above)

Ø           Connector: RJ-45 (front access)

Operation Environmental Conditions: (CPE)

Ø         Temperature:  0 ~ 60°C

Ø         Humidity:       5 ~ 95 %(RH)

Operation Environmental Conditions: (indoor version, LU)

Ø         Temperature:  0 ~ 60°C

Ø         Humidity:       5 ~ 95 %(RH)

Operation Environmental Conditions: (outdoor version, RT)

Ø        Temperature: -20 ~ 70°C

Ø        Humidity: 5 ~ 95% (RH)

 

Shelf  Larger View

      LU and RT Larger View