 |
Line interface: ETSI (TS
101524), ITU-T G.991.2 (Annex A and
Annex B) compliant |
|
Line rate: 64~2,312Kbps |
|
Symbol rate: (Data rate+8000)/3 symbol/sec. |
|
Code: 16-TCPAM (or 2B1Q) |
|
Impedance: 135 |
|
Range: 3.7Km over 0.5mm for 2.312Mbps |
|
Transmit signal power: >13.5dB |
|
PRBS generator and BER test provided |
|
|
Provided EOC (comply with section
9.5 of ITU-T Rec. G.991.2.) for OAM
data and signals Transmission, including
configuration, fault message and performance
monitoring data, and loopback control
signal, etc. |
|
Provide SHDSL line carrier detection,
signal level indication, CRC and noise
margin monitor. |
|
Provisioning parameters: loop attenuation
threshold, worst case SNR target margin,
performance Parameter threshold, SHDSL
power backoff, data rate/line rate and
2M frame format, line code, etc. |
|
|
Test capability: Near end loopback
(NLB), local loopback, remote loopback
(RLB) and Remote payload loopback (PLB).
PLB of V.356 interface can be activated
and deactivated by in band signal which
procedure and codewords comply with
ITU-T V.54. |
|
Wire-wrapped or RJ11, RJ45, DB-9
line connector customer request |
|
|
Power consumption:Active:
<12Watt
Standby: <9Watt |
|
Power consumption: 6Watt |
|
|
Operation environment:Humidity: 5-95%
without condensation
Temperature: -10oC ~ 70oC |
